The SIG P365 SAS, also known as the SIG Sauer P365 SAS, is a subcompact, concealed carry handgun that has gained a lot of popularity in recent years. The innovative design, high firepower capacity, and integrated sighting system make it a preferred choice for many. However, just like any other firearm, the SIG P365 SAS has had its fair share of reported problems.
In this blog post, we will thoroughly discuss the various issues users have encountered with the P365 SAS by delineating each problem, evaluating their root causes, and providing fixes and solutions to help improve your shooting experience.
Slide Lock and Failure to Lock Back
One common issue users have reported with the P365 SAS is the lack of slide lock or failure to lock back on the last round. This issue isn’t exclusive to the P365 SAS; it’s a common problem in many firearms.
Possible Causes
Some reasons for this issue include:
- Shooting grip: Limp wristing is a term used to describe a shooting grip that fails to provide adequate support to the firearm. This can cause the slide to malfunction and prevent it from locking back properly.
- Slide lock spring: A weak or improperly installed slide lock spring could also be the cause for the slide not locking back.
- Ammunition: Poor quality or underpowered ammunition may fail to provide enough energy for the slide to lock back on an empty magazine.
Fixes and Solutions
To resolve the slide lock issue, try the following:
- Improve your shooting grip: Make sure to hold the firearm firmly and with proper support to prevent limp wristing.
- Inspect and replace the slide lock spring if necessary: Consult a certified gunsmith for help with this process.
- Use high-quality ammunition: Choose well-known brands with positive reviews and dependable performance for your P365 SAS.
Failure to Feed (FTF)
Another problem P365 SAS users have reported is the failure to feed (FTF), where the firearm does not properly chamber the next round from the magazine.
Possible Causes
There could be a few reasons for this issue:
- Magazine issues: Damaged or faulty magazines may cause the round not to be fed correctly into the chamber.
- Dirty or improperly lubricated firearm: A dirty firearm or one without proper lubrication can cause feeding issues.
- Ammunition problems: Some types of ammunition may cause feeding problems due to their design or quality.
Fixes and Solutions
To resolve the P365 SAS failure to feed issues, consider the following steps:
- Inspect and replace the magazine if necessary: If you suspect magazine issues, try using a different magazine to see if the issue persists.
- Clean and lubricate the firearm: Make sure the firearm is thoroughly cleaned and properly lubricated as per the manufacturer’s instructions.
- Try different ammunition: Test various brands and types of ammunition to find the one that works best with your P365 SAS.
Meprolight FT Bullseye Sighting System
The P365 SAS features a unique, integrated Meprolight FT Bullseye sighting system. While many users appreciate this innovative feature, some have reported problems with its functioning.
Possible Issues
These issues may include:
- A crowded sight picture: The design of the Meprolight FT Bullseye may make the sight picture appear too busy, leading to difficulties in acquiring targets quickly or making precise shots.
- Low-light conditions: The tritium illumination in the Meprolight FT Bullseye might not be bright enough for some users in low light conditions.
Fixes and Solutions
To solve Meprolight FT Bullseye-related issues:
- Tweak your shooting style: Adapt to the SAS sighting system by learning to focus on the front sight and placing the dot over the target.
- Practice shooting in low light: Gain familiarity with low light shooting by practicing in different lighting conditions.
Trigger Issues
A few users may face issues like a gritty or stiff trigger on their P365 SAS.
Possible Causes
These could be:
- New firearm: A new firearm’s trigger may feel gritty or stiff initially due to factory lubricants or machining burrs.
- Dirt and debris: Accumulated dirt, debris, or shooting residues might cause a problematic trigger pull.
Fixes and Solutions
To remedy trigger problems, consider the following:
- Break-in period: Allow the firearm to go through a break-in period of a few hundred rounds. This should smooth out the trigger action.
- Clean and lubricate: Properly clean and maintain your firearm as instructed by the manufacturer.
In conclusion, the SIG P365 SAS is a popular concealed carry option, but as with any product, it’s not without its problems. By understanding the possible issues, their causes, and the fixes and solutions we’ve provided, you can enhance your shooting experience and enjoy using the SIG P365 SAS to its fullest potential.
Frequently Asked Questions
1. Is the Sig P365 SAS accurate?
Yes, the Sig P365 SAS is accurate. It has a unique sight system that allows for quick target acquisition and minimal sight picture to help increase accuracy.
2. Are there any issues with the Sig P365?
Some users have reported issues with the Sig P365, including occasional failures to fire and trigger reset issues. However, these issues are relatively rare and can often be resolved with proper maintenance and care.
3. Is the Sig P365 reliable?
Overall, the Sig P365 is considered to be a reliable firearm. It has a solid reputation for durability and function, with many users reporting little to no issues in their use of the gun.
4. Can the sights on a Sig P365 SAS be adjusted?
No, the sights on the Sig P365 SAS cannot be adjusted. They are fixed into the slide and designed to work in conjunction with the unique sight system that is part of the SAS model.
5. What is the SAS sight system on the Sig P365 SAS?
The SAS sight system on the Sig P365 SAS includes a flush-mounted fiber-tritium front sight and a completely flat rear sight. This helps to reduce snag points and improve target acquisition speed.
6. What is the capacity of the Sig P365 SAS?
The Sig P365 SAS has a standard magazine capacity of 10 rounds, although it is also available in a variety of other magazine configurations for those who prefer more or less capacity.
7. Does the Sig P365 SAS have any safety features?
Yes, the Sig P365 SAS features both a manual thumb safety and a firing pin safety to help prevent accidental discharges and ensure safe operation of the firearm.
8. How does the Sig P365 SAS compare to other guns in its class?
The Sig P365 SAS is well-regarded among firearms experts and enthusiasts for its exceptional balance of size, capacity, and performance. It has been praised for its accuracy, reliability, and ease of use.
9. What kind of maintenance does the Sig P365 SAS require?
The Sig P365 SAS requires regular cleaning and lubrication, as well as periodic inspections and maintenance by a qualified gunsmith. It is also important to use high-quality ammunition and to properly store the firearm when not in use.
10. What accessories are available for the Sig P365 SAS?
There are a variety of accessories available for the Sig P365 SAS, including holsters, magazines, and sights. Some users may also wish to customize the gun with different grips, slides, or trigger systems.