When it comes to choosing the perfect shotgun for hunting or clay shooting, the CZ Bobwhite G2 is often in the conversation. A side-by-side shotgun featuring a double-trigger design and an old-school vibe, the Bobwhite G2 is an affordable, reliable, and good-looking option for many enthusiasts. However, like any other firearm, it’s not without its issues.
In this blog post, we will delve into the various problems that some users have encountered with the CZ Bobwhite G2 – from trigger issues to stock cracks – and discuss potential fixes and solutions. Our goal is to provide a comprehensive and well-structured guide for those considering purchasing or troubleshooting their Bobwhite G2 so that you can make an informed decision.
Trigger Issues
Heavy Trigger Pull
One of the most common complaints about the CZ Bobwhite G2 is the heavy trigger pull. Such a problem can hinder the accuracy and comfort of the shooter, and may even lead to problems like trigger freeze (inability to pull the trigger due to excessive force required).
However, the heaviness of the trigger pull can be alleviated by giving the firearm a thorough cleaning, removing built-up dirt or residue. If this doesn’t do the trick, consulting a gunsmith to adjust or replace the trigger mechanism can help resolve the issue.
Double-Trigger Reset Problems
Another issue that some users have reported is the failure of one or both triggers to reset after the gun is fired. This can lead to a misfire or the inability to shoot a second round, which is a primary feature of the side-by-side design.
A possible solution to ensure a timely and proper trigger reset is to make sure the gun is well-cleaned and properly oiled. The grease and residue can occasionally build up in the trigger slot and prevent the trigger from properly resetting. If the issue persists even after rigorous cleaning, a gunsmith should be consulted to diagnose and fix the problem.
Stock Cracking Issues
Cracks Near the Receiver
There have been instances where users have reported cracks in the wood stock around the receiver area of their Bobwhite G2. This issue can be a result of excessive recoil or manufacturing flaws in the wood itself.
To avoid further damage to your shotgun, refrain from continued use as soon as any crack is detected. Inspect the stock meticulously for any signs of damage, and if found, contact CZ customer service or a qualified gunsmith for assistance in repair or replacement.
Stress-Related Cracking
Stress-related cracking in the wood stock may also occur due to improper storage or mishandling, such as racking the shotgun one-handed. To prevent this, always support the gun’s weight with both hands when handling it or racking the action. Additionally, keep the shotgun well-maintained and stored in a cool, dry place to avoid moisture buildup or material degradation.
Barrel Issues
Barrel Alignment
Another problem some CZ Bobwhite G2 users face is barrel alignment. Misaligned barrels can result in inaccurate shots or safety concerns. Checking the alignment of your barrels should always be part of your pre-hunting or shooting routine.
If you suspect that your barrels are misaligned, take your shotgun to a gunsmith for inspection and possible repair. Attempting to realign the barrels on your own is highly discouraged, as improper alignment may not only damage your gun but also pose a risk to your safety.
Barrel Erosion
In a few rare cases, users have reported erosion in the barrels of their Bobwhite G2. This can eventually lead to pitting and ultimately affect the accuracy of your shotgun. Regular cleaning and maintenance, including carefully inspecting the barrels for any signs of wear, can help prevent barrel erosion. In case you detect erosion in your shotgun, consult with a gunsmith for a professional evaluation to determine the best course of action.
Maintenance and Cleaning
As evident from the problems discussed above, many of the CZ Bobwhite G2’s issues can be resolved or prevented through proper cleaning and maintenance. By following these steps, you can keep your shotgun in good working condition:
- Unload the gun and verify that the chamber is clear.
- Break down the gun into its primary components.
- Use a barrel solvent to clean fouling and debris from the barrels, as well as to clean the choke tubes.
- Clean the trigger mechanism, using a brush or cloth to remove dirt or residue.
- Inspect the stock for cracks or other damage.
- Oil key components such as the action, trigger mechanism, and chokes.
- Reassemble the gun and perform a functions check to ensure everything is working correctly.
In conclusion, while the CZ Bobwhite G2 is a popular choice among shotgun enthusiasts, it is essential to be aware of the potential problems associated with it. Regular cleaning, maintenance, and inspection are vital to ensuring the longevity and performance of your shotgun. If you ever encounter any issues with your Bobwhite G2, consulting a gunsmith or contacting CZ customer service is always the best course of action.
Frequently Asked Questions
What is the difference between CZ Bobwhite and Bobwhite G2?
The main difference between CZ Bobwhite and Bobwhite G2 is the trigger system. CZ Bobwhite has a mechanical trigger system while Bobwhite G2 has a single selective trigger system.
What is the length of pull on a CZ Bobwhite?
The length of pull on a CZ Bobwhite is 14.5 inches.
Where is the CZ Bobwhite manufactured?
The CZ Bobwhite is manufactured in Turkey.
What is better side by side or over under?
There is no definitive answer to this question as both side-by-side and over-under shotguns have their own advantages and disadvantages. Side-by-side shotguns are typically lighter and easier to swing, while over-under shotguns are more versatile and allow for better accuracy.
What is the weight of a CZ Bobwhite?
The weight of a CZ Bobwhite is around 6.3 to 6.5 pounds, depending on the gauge.
What is the maximum effective range of a CZ Bobwhite?
The maximum effective range of a CZ Bobwhite depends on the gauge and choke configuration, but it is typically around 30 to 40 yards.
Does the CZ Bobwhite have automatic ejectors?
No, the CZ Bobwhite does not have automatic ejectors. It has extractors that lift the shells out of the chamber.
What is the choke configuration on a CZ Bobwhite?
The choke configuration on a CZ Bobwhite can vary, but it typically comes with fixed chokes of modified and improved cylinder.
Is the CZ Bobwhite suitable for trap shooting?
The CZ Bobwhite is not specifically designed for trap shooting, but it can be used for this purpose. However, its side-by-side configuration may not be as effective for trap shooting as an over-under shotgun.
What is the price range of a CZ Bobwhite?
The price range of a CZ Bobwhite can vary depending on the gauge and configuration, but it is typically between $700 and $900.